Advantech Wireless AMT-50 is an advanced SCPC Satellite Modem, integrated seamlessly with Advantech Wireless’ A-SAT-II™, packed with DVB-S2X, NS4, and advanced Carrier-Echo-Cancelling technologies.

Overview

The AMT-50 is a member of the Advantech Wireless SCPC Satellite Modem series along with the AMT-50X Enhanced Satellite Modem (up to 850Mbps).

As part of the A-SAT-II™ family, the AMT-50 seamlessly integrates to Advantech Wireless management systems, and changes waveforms according to artificial intelligence or preconfigured triggers.

The AMT-50 typically boosts spectral efficiency by 40% to 60% compared with DVB-S2 equipment. NS4 also adds superior resilience to jamming, interference, phase-noise and weather fluctuations. For additional savings in operational costs, add optional Carrier-Echo-Cancelling to double the bandwidth available on a single carrier.

The AMT-50 can operate with either the NS4 proprietary technology, or within the state of the art standard DVB-S2X, performing Generic Stream Encapsulation (GSE), allowing the native carriage of IP with a significant reduction in the overhead required compared to using MPE, supports ACM, and performs the modulation function.

The AMT-50 can either function as a Remote Site or HUB integrated unit, providing maximal performance and scalability.

Demonstrating outstanding performance and superiority, the AMT-50 includes built-in IP processing features to make data transmission more efficient and cost-effective. The AMT-50 integrated IP processing unit supports a wide range of features such as advanced QoS, transparent bridging (Layer 2), VLAN switching (Layer 2), routing mode (Layer 3) and TCP header and payload acceleration.

Key Features

• Carrier-Echo-Cancelation
• NS4
• DVB-S2X
• DVB-GSE
• Advanced ACM
• Up to 60 Mbps throughput
• Up to 36 Msps
• Down to 1% Roll-Off
• Up to 4 x E1/T1 Interfaces
• Time Slice Number (TSN) Technology
• Transmit Frequency Range 950-2150 MHz
• Enhanced DVB-S2X modcods up to 256APSK
• 1:N Redundancy Support

The post AMT-50 Advanced SCPC Satellite Modem appeared first on Advantech Wireless.

Advantech Wireless AMT-50X Enhanced SCPC Satellite Modem, seamlessly integrates with Advantech Wireless’ A-SAT-II™, packed with DVB-S2X, NS4, and advanced Carrier-Echo-Cancelling technologies.

Overview

The AMT-50X Enhanced model, is a member of the Advantech Wireless SCPC Satellite Modem series along with the AMT-50, completing the series with the highest performance.

As part of the A-SAT-II™ family, the AMT-50X seamlessly integrates to Advantech Wireless management systems, and changes waveforms according to artificial intelligence or preconfigured triggers.

The AMT-50X typically boosts spectral efficiency by 40% to 60% compared with DVB-S2 equipment. NS4 also adds superior resilience to jamming, interference, phase-noise and weather fluctuations. For additional savings in operational costs, add optional Carrier-Echo-Cancelling to double the bandwidth available on a single carrier.

The AMT-50X can operate with either the NS4 proprietary technology, or within the state of the art standard DVB-S2X, performing Generic Stream Encapsulation (GSE), allowing the native carriage of IP with a significant reduction in the overhead required compared to using MPE, supports ACM, and performs the modulation function.

The AMT-50X can either function as a Remote Site or HUB integrated unit, providing maximal performance and scalability.

Demonstrating outstanding performance and superiority, the AMT-50X includes built-in IP processing features to make data transmission more efficient and cost-effective. The AMT-50X integrated IP processing unit supports a wide range of features such as advanced QoS, transparent bridging (Layer 2), VLAN switching (Layer 2), routing mode (Layer 3) and TCP header and payload acceleration.

In addition to the ultra-high data rate capabilities, the AMT-50X also packs special features such as advanced secured transmission, OC-3/STM-1, and ASI direct interface connections, for multi solutions and higher grade integration.

Key Features

• NS4
• DVB-S2X
• DVB-GSE
• Carrier-Echo-Cancelation
• Up to 80 Msps
• Up to 850 Mbps throughput
• ASI Interfaces
• OC-3/STM-1 Interface
• Up to 4 x E1/T1 Interfaces
• Down to 1% Roll-Off
• Time Slice Number (TSN) Technology
• Enhanced DVB-S2X modcods up to 256 APSK
• Advanced ACM
• 1:N Redundancy Support
• Transmit Frequency Range 950-2150 MHz

The post AMT-50X Enhanced SCPC Satellite Modem appeared first on Advantech Wireless.

Advantech Wireless FLS-5000 is an advanced HTS Forward Link Sub System, multi-function, high speed processing unit which unifies all critical Outbound/Forward Link operations into one box.

Overview

The unit contains a state of the art, 500 Msps, DVB-S2X, Modulator, integrated with a High Throughput 2.5 Gbps IP Encapsulator (IPE), supported by an advanced ACM Mode Adaptation Unit (MAU). The FLS-5000 performs 4 main functions; it multiplexes DVB-RCS/RCS2 signaling together with the user’s traffic, performs Generic Stream Encapsulation (GSE), allowing the native carriage of IP with a significant reduction in the overhead required compared to using MPE, supports ACM, and performs the modulation function. ACM permits modulation and coding adaptation for fading environments. The FLS-5000 was designed to support all HTS satellite needs, focusing on extensive High Throughput capabilities which allow the operator to use a single FLS-5000 to fully occupy a whole HTS transponder while simplifying the operation magnitude, and emphasizing CAPEX savings.

Advantech Wireless is globally pioneering the High Throughput Satellite market while providing a unique ultra-high data rate which the VSAT market has yet to see.

Key Features

• DVB-S2X
• DVB-GSE
• Advanced ACM
• Up to 2.5 Gbps throughput
• Up to 500 Msps
• Down to 1% Roll-Off
• 8 ASI Inputs (64 optional)
• Time Slice Number (TSN) Technology
• Transmit Frequency Range 950-2150 MHz
• Enhanced DVB-S2X modcods up to 256 APSK
• Multiplex DVB-S2X baseband frames into a single modulated carrier
• DVB TSN Multiplexer
• IP Encapsulator (IPE )
• 1:N Redundancy Support
• ACM Mode Adaptation Unit (MAU)

The post FLS-5000 appeared first on Advantech Wireless.

Power Supply Module for Satellite Block Up-Converters
Designed to supply DC power to Advantech Wireless Lightweight GaN BUCs

Features

• Multiplexes 48 VDC with L-Band signal & 10 MHz Reference from external satellite modem
• 5 Amps continuous
• 300W Output Power
• ON/OFF LED indicator

Overview

The ADV-AC/DC-48-300 POWER SUPPLY MODULE combines +48V DC along with the L-Band signal and the 10 MHz external Reference to the input of a SSPB unit. The unit contains one 48 VDC Power Supply Module and an internal Bias Tee. The typical current capability of the Power Supply @ 48 V DC is 5 A continuous.

The post Power Supply Module for Satellite Block Up-Converters appeared first on Advantech Wireless.

50W Ku-Band AIRBORNE Grade SSPB Advanced GaN Technology designed to meet the most stringent Airborne Standards

Features

• Low profile, ideal for Airborne SATCOM applications
• Saturated output power of 50W in a single compact package
• Weatherproof construction, meets RTCA/DO-160G
• M&C via RS-232/RS-485 configurations

Overview

Based on GaN technology the new 2500-G Series Ku-Band BUCs provide high power density in a compact size. Advantech’s solid expertise in Earth Station SSPB has now been combined with the specific features and operational requirements of airborne operation. The 2500-G Series’ rugged and conservative thermal design allows operation over an extreme temperature range. These new Ku-Band BUCs are designed to meet DO-160G specifications.

*Other power levels available upon request.

Advantages

• High Reliability GaN design
• Extreme Temperature Operating Range: -55°C to + 70°C
• Low Energy Consumption

The post 50W Ku-Band AIRBORNE Grade SSPB Advanced GaN Technology appeared first on Advantech Wireless.

Features

• Up-converts an L-Band input frequency 950 ‰- 1525 MHz to the C-Band frequency of 5.85 ‰- 6.425 GHz (5.85 -6.725 GHz option)
• Rated Output Power from 16W to 25W
• Phase-locked local oscillator locks directly to an external 10 MHz reference
• Exceeds IESS 308/309 Phase/Noise requirements by 3 dB
• Robust, weatherproof package
• Protection against thermal runaway and out-of-lock conditions
• CE Marking

Overview

The SSPBg-210C series is hub-mount up-converter transmitters, using GaN Technology, operating in the C-Band. The SSPBg-210C is an integrated unit, complete with power supply, phase-locked oscillator, mixer, filter and cooling mechanism. Intended for outdoor operation, the SSPBg-210C provides the utmost in convenience and efficiency. Other SSPBs are also available for higher powers or for operation at other up-link frequencies. The hub-mount SSPBg-210C is constructed in a compact cooling enclosure for outdoor operation. The units are weatherproof. They are the smallest fully integrated units on the market today. The design of these units is based on Advantech’s industry proven reliable solid-state high power amplifiers. Built-in design features result in a product with exceptional linearity and operating efficiency. The use of high efficiency power supply and conservative thermal designs contribute to the trouble-free operation of the unit.

Application

The SSPB‰’s convert an L-Band signal (950 – 1525MHz) to the C-band frequency of 5.85 ‰- 6.425 GHz. Designed for C-Band satellite up-link applications the SSPBg-210C^TM series is fully integrated units with up to 16W or 25Woutput power designed for mounting outdoors, near the hub of an antenna. The size and weight of this very compact design makes is especially attractive for man-pack terminal applications. C-Band SSPB is available in output power of up to 1250W.

Accessories

• Mounting kit
• External Harmonics reject filter (-65dBc)

The post C-Band 16W/20W/25W SSPBg-210C GaN Series appeared first on Advantech Wireless.

SECOND GENERATION GaN TECHNOLOGY

Features

• Full range of output power of 80W to 125W in a compact single package
• Build-In High Power Circulator and Dummy Load
• High linearity
• Full M&C capability via RS485 or Ethernet port
• Built-in Forward precision powering metering
• Output RF calibrated Sample Port
• Redundant Systems shipped fully tested
• Detachable power supply module
• Weatherproof construction
• CE marking

Options

• 1:1 or 1:2 Redundant configuration
• Internal/External reference with auto-sensing
• External Harmonic Reject Filter

Accessories

• Mounting Kits
• Remote M&C panel with SNMP
• Flexible and Rigid waveguides
• Mounting Frames
• External Receive Reject Filter (-65dBc)
• CPR 137 to N Type adapter

Overview

The new Super Compact TT-Series C-Band SSPBs provide highest power density in the industry. Combined with the traditional Advantech Wireless’ features, these new series of BUCs provide the ultimate in performance, reliability, and convenience.

The post C-Band 80W/100W/125W Hub-mount SSPB/BUC Second Generation GaN Technology appeared first on Advantech Wireless.

SECOND GENERATION GaN TECHNOLOGY

Features

• Full range of output power of 80W to 125W in a compact single package
• Build-In High Power Circulator and Dummy Load
• High linearity
• Full M&C capability via RS485 or Ethernet port
• Built-in Forward precision powering metering
• Output RF calibrated Sample Port
• Redundant Systems shipped fully tested
• Detachable power supply module
• Weatherproof construction
• CE marking

Options

• 1:1 or 1:2 Redundant configuration
• Internal/External reference with auto-sensing
• External Harmonic Reject Filter

Accessories

• Mounting Kits
• Remote M&C panel with SNMP
• Flexible and Rigid waveguides
• Mounting Frames
• External Receive Reject Filter (-65dBc)
• CPR 112 to N Type adapter

Overview

The new Super Compact TT-Series X-Band SSPBs provide highest power density in the industry. Combined with the traditional Advantech Wireless’ features, these new series of BUCs provide the ultimate in performance, reliability, and convenience.

The post X-Band 80W/100W/125W Hub-mount SSPB/BUC Second Generation GaN Technology appeared first on Advantech Wireless.

Overview

The Advantech Wireless range of transceivers uses the latest technology, thus providing the ultimate in performance and user friendly operation at a very competitive price.

AWMTg-4000LK is a family of hub-mount transceivers operating in the Ku-band with L-Band Interface from 300W to 400 W based on GaN technology. These transceivers are designed for continuous operation in the harshest outdoor environment. The built-in microprocessor controller provides for external monitoring and control of the operating parameters, and for the redundancy control. The LNB is connected to the transceiver with a single coaxial cable.  Apart from the LNB, the complete unit is available in a single integrated package.

The flexible and comprehensive monitor and control features on the transceiver ensure that it will fit into any network management system architecture. The user-friendly RS-232 interface will provide full set-up and fault monitoring facilities via a PC terminal mode communication or a hand-held terminal.  The RS-485 interface will provide functional remote Monitor & Control, using the Graphic User Interface (GUI) or the Monitor & Control Panel.

Features

• Operating Ku-Band Tx: 14.00 – 14.50 GHz, 13.75 – 14.50 GHz (optional) & 12.75 – 13.25 GHz (optional)
• Rx: 10.95 – 12.75 GHz (sub-bands)
• L-Band Tx and Rx interface
• Easy to install and operate
• Compact light weight design
• Weatherproof package
• Phase-locked LNB
• Low phase noise
• Remote Monitor & Control (RS-232/RS-485)
• Relay alarm indicators
• LED status indicators
• Automatic high reflected power protection
• High stability internal 10MHz reference
• Downloadable PC GUI
• Redundant ready operation
• Power supply with PFC
• Ethernet interface (optional)

Options and Accessories

• Extended Ku-band (13.75 – 14.50 GHz)
• Low Ku-Band (12.75 – 13.25 GHz)
• LNA operation
• Remote M&C panel
• External 10 MHz reference with auto sensing
• Mounting kits for transceiver installation
• Redundancy kits
• Mounting frame for redundancy applications
• Transmit Reject Filter and/or Receive Reject Filter (external)
• Hand-Held terminal

Redundancy

The AWMTg-4000LK series of transceivers may be configured to operate in 1:1 redundancy mode. No extra controller is required for redundancy operation, as the built-in controller in each amplifier provides this function. Redundancy kits are required for redundant operation.

The post Ku-Band Transceiver 300W to 400W AWMTg-4000LK Series L-band IF Interface GaN Technology appeared first on Advantech Wireless.

Features

• Modular architecture with built in redundancy for high reliability
• Fast pulse rise/fall times (<100 ns)
• Duty cycle up to 10%
• Minimal pulse droop (<1% @ 100 µs)
• High stability (phase and amplitude)
• Gain compensation over temperature
• Remote monitor and control capability via RS485 (Ethernet port optional).
• Input and output sample monitor ports
• Power factor correction
• Hot swappable elements
• No rear access required for operation or maintenance

Overview

The Advantech Wireless Model APRA-S10000B, Second Generation GaN based S-Band solid-state pulse amplifier operates over the band of 2.9 – 3.1 GHz and it is designed for Military Grade Radar Systems. The peak power at the output connector is 10,000W.  The APRA-S10000B is a fully modular system with built in redundancy.  The design of the product is based on Advantech’s tradition of high power and high efficiency line of amplifiers.

Built-in features such as duty cycle monitor and pulse width monitor ensure trouble free operation.

Description

The design of the APRA pulse amplifier is based on Advantech Wireless’ industry proven reliable solid state power amplifiers. The following is a description of the system elements and their salient features:

The APRA pulse amplifier contains the following elements:

• Redundant Input/Driver Module
• Splitter panel, one per amplifier chassis
• RF chassis each containing four 1.5 kW pulse amplifier modules
• Power supply modular package, one per amplifier chassis
• Two High-power 4:1 Combiners
• High Power waveguide combiner

The post 10kW S-Band Second Generation GaN based Solid State Pulse Amplifier MODEL APRA-S10000B appeared first on Advantech Wireless.

Features

• MIL-STD-188-165A COMPLIANT
• Software Defined Radio
• Data Rates 4kbps – 155Mbps in 1bps steps
• DVB-S / DVB-DSNG / DVB-S2 with ACM
• Intelsat Viterbi, Reed Solomon, Turbo, or LDPC Coding
• Intelsat and OM-73 (V)/G scrambling
• Built in BERT
• Clock recovery from input data
• IP Data Interface
• GSE encapsulation
• Excellent spurious performance
• Meets 40dBc ACI requirement
• L-Band 950 to 2050 MHz
• 70/140 MHz IF options
• Compliant with IESS 308/309/310
• AES 128/256 encryption
• Direct Sequence Spread Spectrum (DSSS) spreading

Applications

The AMT 83L Modem Series continues the line of the first worldwide satellite modem (AMT-73L), to be certified with MIL-STD-188-165A by DISA.  The AMT-73L was designed to fulfil two way satellite communication requirements in Defense Satellite Communications Systems (DSCS). Several thousands of these modems were deployed in the field on tactical terminals.

Overview

AMT 83L Modem Series – Advanced Military Grade Satellite Modem

Based on the Advantech Wireless “Software Defined Radio” architecture, the AMT-83L satellite modem series adds a number of advanced features to the DISA certified AMT-73L series modems. Among these new features there are:

• DVB-S2 with LDPC Coding and Adaptive Coding and Modulation (ACM)
• IP data interface
• GSE encapsulation
• Direct Sequence Spread Spectrum (DSSS) spreading
• AES 128/256 Encryption

All these new features transform the AMT-83L series modem into a powerful satellite communication tool. The modem can now address the new advanced and efficient DVB-S2 modulation and error corrections codes, via full-fledged IP traffic, with built in router, and GSE encapsulation, as well as the SATCOM-on-the-move (SOTM) mobility applications due to the DSSS spreading features.

With built in AES 128/256 Encryption, the modem allows for secure communication links, unhindered by eavesdropping.

The standard data interface is the IP Gateway, with optional EIA530/499, HSSI, ASI.

The IP Gateway data interface is a miniaturized fully fledged IP router designed to give ease of use, support for a wide range of protocols, security and QoS.

1:1 Redundancy switching is built into the unit as an optional feature.  With the addition of an interconnecting control cable between the modems and the switch unit for IF and data interfaces complete redundancy is achieved.

Monitoring and Control is performed via Ethernet using HTTP, Telnet or SNMP.

The post AMT 83L Modem Series – Advanced Military Grade Satellite Modem appeared first on Advantech Wireless.

A-Line Antenna Series 11m Ku-Band

Features

• Compliant with ITU-R S.586-6
• Modified Cassegrain Optics
• High G/T, Excellent pattern Characteristics
• Hot-dipped Galvanized steel ground mount assembly
• Motorization with manual control
• Ladder & Platform compliant to International Standard
• Hub Integration for SSPA/SSPB.

Options

• De-ice system
• Paint over galvanize
• Turnkey Installation & Test
• Integrated LNB and LNB system
• Monopulse mode coupler
• Monopulse tracking system
• CP/LP switchable feed.

The post A-Line Antenna Series 11m Ku-Band appeared first on Advantech Wireless.

Features

• Industry First M2M / IoT / SCADA Ultra-Compact All-Outdoor VSAT Transceiver-Router entirely integrated within a versatile broadband VSAT platform
• Consists of a single mono-block housing integrating modem, Ku or Ka-Band transmitter, receiver, antenna and feed system
• Flexible waveforms and symbol rates
• DVB-S2/ACM, DVB-S2X, DVB-RCS2, DVB-RCS
• Ka or Ku Transmission
• Ka or Ku Reception
• Receives both VSAT and DTH
• Compliant with legacy DTH services
• Power over Ethernet (POE) or Ethernet Over Coax
• Simple Installation

Applications

• Transaction Oriented Applications: Gas Stations, ATM Machines, Lottery, Self-Service/Voting Kiosks, …
• Interactive-TV: VoD, Program Rating, Shopping, Social TV, Subscriber Profiling…
• Sensor Networks such as Oil and Water pipe lines, Smart Fences and Perimeter Control
• SmartGrid, M2M, SCADA and Telemetry
• Smart Home and Internet-of-Things(IoT)
• Large-scale Random Access Messaging Networks

Sample markets

• Enterprise
• Government
• Network Operators / Service Providers / Broadcasters
• DoD, Homeland Security, Border and Critical Infrastructure Vigilance
• Oil, Gas, Energy and Utilities

Overview

Advantech Wireless Ku/Ka 8200 Series of Ultra-Compact All-Outdoor VSAT transceiver-routers was specifically designed for M2M, SCADA, Telemetry and IoT over satellite, and can be combined with all other Advantech Wireless VSAT terminals within the same ASAT system according to application requirements.

The Ku/Ka 8200 Ultra-Compact All-Outdoor VSAT transceiver-router was specifically designed for lower data rate applications requiring high reliability and simple installation. Furthermore, ASAT access methods and waveforms were enhanced in order to ensure optimum SCADA, IoT and M2M applications performance.

The ability to combine the Ku/Ka 8200 with our complete line of VSAT Broadband terminals further enhances deployment flexibility, as such VSAT terminals could be utilized for satellite backhaul of a concentration of SCADA, M2M and IoT devices connected via other wireless mediums such as LTE or WiFi, whilst the 8200 can be utilized for those locations only reachable via satellite.

For Broadcasters Interactive TV applications, the Ku/Ka 8200 supports Ku reception of TV Signals, together with Ka or Ku reception of Broadcast Data and Ka or Ku transmission of low data rates transactional messaging applications such as VoD, TV Rating and Profiling, scaling from small to very large networks.

Supporting both Ku and Ka HTS satellites reception via DVB-S2 or DVB/S2X, and transmitting via DVB-RCS/RCS2 modes uniquely adapted for random transactional low data rate applications make Advantech’s Ku/Ka 8200, combined with broadband VSAT terminals within Advantech’s leading ASAT VSAT multi-service, multi-waveform VSAT platform provide for the best solution for SCADA, IoT and M2M applications over Satellite.

The post Ku/Ka 8200 Series M2M / IoT / SCADA Ultra-Compact All-Outdoor VSAT Transceiver-Router appeared first on Advantech Wireless.

Features

• Converts L-Band signal Ka-Band from 27.5 – 31 GHz (in bands)
• Meets the requirements per MIL-STD-188-164A and WGS
• Integrated amplifier with an output power of 100W to 200W
• Phase-locked oscillator to external 10MHz reference (optional)
• High linearity (very low intermodulation products)
• Weatherproof package, IP67 compliant
• Remote Monitor & Control
• Protection against overdrive, thermal runaway and out-of-lock conditions
• Output sample monitoring port
• Detachable power supply
• Compact packaging
• CE Marking

Options

• Ethernet Interface, via 100BT
• Internal High Stability Reference with input auto-sensing
• Environmental Protection IP67
• Redundant system 1:1 and 1:2
• Extreme temperature, -45 deg Celsius to +70 deg Celsius

Overview

The SSPB-4010Ka^TM series are hub-mount transmitters, operating in the Ka-Band. The GaN based SSPB-4010Ka^TM is an integrated unit, complete with detachable power supply, phase-locked oscillator, mixer, filter and cooling mechanism.  Intended for outdoor operation, the SSPB-4010Ka^TM provides the utmost in convenience and efficiency. Other SSPB’s are also available for higher powers or for operation at other up-link frequencies.

Application

The SSPB-4010Ka^TM is designed for Ka-Band satellite up-link applications. They are mounted outdoors, in the hub, or near the hub of an antenna. Also available from Advantech Wireless are the SSPA series – solid-state high power amplifiers – with all the features of the SSPB’s except block up-converter. Please contact Advantech Wireless™ for more information.

Redundancy

The SSPB-4010Ka^TM series are available in redundant configuration with single Monitor and Control interface.

The post Ka-Band 125W to 200W SSPA/SSPB/BUC UltraLinear Second Generation GaN Technology appeared first on Advantech Wireless.

Features

• Covers Standard Ku-band 14.0 -14.5 GHz or Extended Ku-band 13.75 – 14.5 GHz in one unit, with user selectable LO switch, or single 12.75 – 13.25 GHz for Lower Ku-band
• Rated Output Power from 50W, GaN technology
• Exceeds IESS 308/309 Phase/Noise requirements by 6 dB typ
• Phase-locked local oscillator locks directly to an external 10 MHz reference
• Robust, weatherproof package
• Protection against thermal runaway and out-of-lock conditions
• CE Marking
• Light weight and small consumption, ideal for Satcom Manpack terminals, Drive-Away and Fly-Away applications

Overview

The SSPBg-210K^TM series is boom-mount BUC, specifically designed for mobile antenna applications, using GaN Technology, operating in the Ku-Band. The SSPBg-210K^TM is an integrated unit, complete with power supply, phase-locked oscillator, mixer, filter and cooling mechanism. Intended for outdoor mobile operation, the SSPBg-210K^TM provides the utmost in convenience and efficiency. Other SSPBs are also available for higher powers or for operation at other up-link frequencies.

The hub-mount SSPBg-210K^TM is constructed in a compact cooling enclosure for outdoor operation. The units are weatherproof. They are the smallest fully integrated units on the market today.

The design of these units is based on Advantech’s industry proven reliable solid-state high power amplifiers. Built-in design features result in a product with exceptional linearity and operating efficiency. The use of high efficiency power supply and conservative thermal designs contribute to the trouble-free operation of the unit.

Application

The SSPB’s convert an L-Band signal 950 – 1450MHz  to the Ku-band frequency of 14.0 – 14.5 GHz or 12.75 – 13.25 GHz; or 950-1700 MHz to the Extended Ku-Band frequency of 13.75 – 14.5 GHz, by selecting the proper LO in the field for Ku/Kx (the Kl is the separate unit). Designed for mobile Drive-Away and Fly-Away Ku-Band satellite up-link applications the SSPBg-210K^TM series is fully integrated units with 30W, 40W or 50W output power intended for mounting directly on the boom of Drive-Away or Fly-Away and Manpack antennae.

The size, improved efficiency and weight of this very compact design make it especially attractive for man-pack terminal applications.

Accessories

• Mounting kit
• External Receive reject filter (-65dBc)
• External Power Supply AC/DC with integrated Bias-Tee

The post 30W/40W/50W Ku-Band Lightweight BUC/SSPB/SSPA – GaN Technology appeared first on Advantech Wireless.

VR7900 Ruggedized SCPC/RCS VSAT Terminal

Features

• Ruggedized, Fanless, operates -40ºC to +65ºC
• Supports 4 modes of operation:
  • SCPC point-to-point in DVB-S2/S2X mode
  • SCPC point to multipoint in DVB-S2/S2X
  • SCPC Rx, MF-TDMA Tx
  • SCPC Rx, Dynamic switching between SCPC and MF-TDMA Tx, also known as ASAT.
• DVB-S/S2 (CCM,VCM,ACM) receive up to 200 Mbps with the Ethernet throughput up to 100 Mbps
• Transmits up to 9.5 Mbps in DVB-RCS mode and 50 Mbps in DVB-S2/S2X
• Minimum amount of data transferred is 384 bits. Ideal for SCADA systems
• GUI-based control interface
• Easy-to-configure Ethernet connectivity to your PC, LAN or Router
• On-board TCP and HTTP acceleration, and compression
• Application QoS
• VoIP support
• VPN and accelerated VPN support (optional)
• VLAN support
• Easy and simple installation
• Automatic BUC disable for low power application
• Ideal for rugged environment
• Mountable on antenna kingpost
• Wide temperature range (-40^oC to +65^oC).
• Transportable or mobile applications
• IPv4/IPv6 supported

Applications

Internet/Intranet Access, Email, File Transfer, Video Conferencing, VoIP, Rural Telephony, Video Streaming, Backup Services, Private Networking, Video-On-Demand, Distance Learning, Video Surveillance and Homeland Security, SCADA, Military, Rugged Environment.

The post VR7900 Ruggedized SCPC/RCS VSAT Terminal appeared first on Advantech Wireless.

VR7700 Wideband DVB-S2X VSAT

HTS, LEO and drone platform

The VR7700 brings to market a complete hardware product capable of utilizing all the technological advances brought to the market by HTS satellites, LEO and drones such as high capacity and efficient space segment utilization.  The VR7700 is powered by a state of the art ASIC developed by a team of satellite experts including Advantech Wireless. It is a generic hardware platform enabling any VSAT manufactures to port their existing software stack into this small size, low cost, high performance remote.

Wideband and beam hopping ready

The terminal supports the newest DVB-S2X standard including the capability to work with wideband transponders up-to 125MHz, time slicing (DVB-S2X Annex M) and beam-hopping based on the superframe structure (DVB-S2X Annex E).

High throughput

The VR7700 includes, built in hardware accelerators for high bit rate operation, such as AES 256 encryptions, Generic Stream (GSE) decapsulation and other unique features.

Highlights

• Multiple payload support: HTS, LEO, Drone
• High Performance 125 MHz Operation
• DVB-S2X fully compliant
• DVB- RCS2 or Software Defined Radio return Channel
• Low power
• Low cost
• Small size
• Annex M – time slice support
• Annex E – beam hopping support

Overview

The dedicated ASIC or System on a Chip (SoC) is specially designed for 2 way satellite communications utilizing HTS satellites and transponders up to 125 MHz. The SoC is a highly integrated modem based on Software Defined Radio (SDR) architecture and includes support for HTS demodulator and modulator, DSPs, Dual core CPU and dedicated hardware accelerators.

The post VR7700 Wideband DVB-S2X VSAT appeared first on Advantech Wireless.

Features

• Programmable for a variety of Satcom applications
• Front panel display of key operating parameters
• 1RU height
• Interface for remote monitoring and controlling of systems via RS485 or Ethernet
• Field programmable firmware via RS232 port (RJ11 front panel) or Ethernet
• Redundant Power supplies

Options

• Ethernet interface via RJ45, with SNMP 3.1, TELNET and Web Interface

Accessories

• RS485/RS232/USB Adapter Kit
• 30 feet RS485 COM cable
• 300 feet RS485 COM cable

Overview

In the Advantech Wireless redundant SSPA systems, the internal controller in each SSPA unit performs the role of redundancy control. The family of Remote Control Panels is provided as accessories for remote monitoring and manual control of the system parameters. A variety of operating options are available to cover a multitude of systems

All redundancy functionality resides in SSPAs or BUCs, not in this panel. This remote control panel is used for the control and display of operational parameters of the monitored system, mimicking position of the redundancy switches.

The front panel LED and Display provide full access to the operating parameters of the system being monitored and provides with capability of changing the operating parameters.  The rear panel of the nits holds all external communications connectors including parallel discrete interface (DP9 F), RS485 Slave – RS485DCE (DB9 F), RS485 DTE (DB9 M), optional Ethernet and two AC connectors (85 – 264 VAC).

The Serial RS485 Slave Interface is used for the connection to a Network Management System (NMS) or to a PC. The M&C panel will be the slave and the NMS (or PC) will be the master in this configuration.

The Keypad is used to navigate through the various menus provided by the alpha-numeric display.

The post Remote Monitor and Control Panel for SSPAs, BUCs & Transceivers appeared first on Advantech Wireless.

ASAT II™ VSAT Routers and Terminals for Consumer Internet Industrial IoT and  M2M Mass Markets

The Advantech Wireless ASAT II™ Compact Series VSAT routers and terminals pack a rich feature set and powerful performance capabilities into compact satellite appliances. The VSATs are optimized for next-generation High-Throughput-Satellite (HTS) systems.

The Compact Series VSAT Routers and terminals provide high download and upload speeds, TCP/IP and HTTP acceleration,  user traffic compression and QoS capabilities, delivering a true broadband Internet experience, also supporting the ever increasing multimedia and Industrial IoT application demands. The Compact Series is designed around Advantech Wireless XSoC™ (System on Chip) architecture providing great value, versatility and high performance and feature upgradability through  its’ Software Defined Radio (SDR) technology.

Features and Benefits

The Compact Series VSATs support all ASAT II™ System features:

• Wideband DVB-S2X Forward Link providing great spectral efficiency gains. ACM and highly granular MODCODs specifically allow for mass markets such as broadband satellite Internet services
• RCSX™ – ASAT II™ Return Link encompassing DVB-RCS / RCS2 MF-TDMA and ASCPC™ near-SCPC agile MF-TDMA, efficient satellite bandwidth usage and faster upload speeds
• ASAT II™ 3D BoD™ and WaveSwitch™ technologies provides even higher spectral-efficiency and network-utilization, with automatic and seamless RCS MF-TDMA and ASCPC™ waveform and access method switching. WaveSwitch™ optimizes terminal efficiency and overall network utilization based on SLA, real-time traffic demands and traffic density.

All-Outdoor Option

The C8000 and C8200 are fully integrated all-outdoor satellite terminals – antenna feed system, Ka / Ku transmitter and receiver and satellite VSAT router – all housed in a small-sized weatherized outdoor enclosure. The all-outdoor terminal weight and size reduction allows for versatile installation options that can be integrated into existing Satellite DTH sites to add triple-play services, while providing drastic savings in remote-site installations.

Simpler Installation than Ever

The all-outdoor terminal uses a single Ethernet connection to the indoor equipment – host or LAN/WAN equipment – drastically simplifying installation. The compact terminals also support DIY / self-installation and commissioning making the entire installation process easier and affordable than ever.

The post ASAT II™ System Compact Series – VSAT Routers & Terminals appeared first on Advantech Wireless.

VSAT Routers for Prosumer, Enterprise and Corporate Connectivity
The Advantech Wireless ASAT II™ Enterprise Series VSAT Routers are high-performance appliances featuring the full set of networking features for enterprise and corporate environment connectivity. The VSATs feature enterprise-grade security capabilities such as VLAN support, IPSec VPN and routing protocols to support prosumer to large-scale branch office connectivity.

The Enterprise Series VSAT Routers support ultra-fast download and upload speeds, TCP/IP and HTTP acceleration, user traffic compression and reach QoS capabilities for true broadband connectivity to remote offices, optimized for the next-generation High-Throughput-Satellite (HTS) systems.

Features and Benefits
Enterprise Series VSAT Routers support the ASAT II™ System features:

• Support for wideband DVB-S2X Forward Link providing great spectral efficiency gains. ACM and highly granular MODCODs specifically allow for mass markets such as broadband satellite Internet services.
• RCSX™ enhanced DVB-RCS2 / RCS MF-TDMA, ASCPC™ near-SCPC
  MF-TDMA and SCPC Return Link allow for efficient satellite bandwidth usage and faster upload speeds.
• ASAT II™ 3D BoD™ and WaveSwitch™ technologies provides even higher spectral-efficiency and network-utilization, with automatic and seamless RCS MF-TDMA and ASCPC™ waveforms switching. 3D BoD™ and WaveSwitch™ optimizes terminal spectral efficiency and network-wide utilization based on SLA, real-time demand and traffic density, providing near-SCPC efficiencies for all applications.

Enterprise Series terminals also supports SCPC Return Link with the hub, allowing flexible deployment and network growth. Enterprise terminals may be switched remotely between SCPC and RCS MF-TDMA/ASCPC™ when site or network needs changes.

The post ASAT II™ System – Enterprise Series VSAT Routers appeared first on Advantech Wireless.